Table of Contents
Advertisement
Setup Information
This is a setup software in the X-Software which is used to set all information as needed. It
features mainly;
To set Node IP Address
To edit/Create Events(trigger time setup)
Events(Flash files-*swf, *GVI, Video Files-*AVI,*WMV, MPEG Files-*mpeg,*mpg,*mlv, *mp2,*mp3)
Backup/Load
Create GVI
DMX Control Mode Setup
Getting Started
For the setup software working correctly, all events MUST be firstly placed in the scene library called "Scene_lib"
of the X-Soft main folder. To add scenes as needed, the user can simply follow two ways to process;
Manually copy these selected scenes(swf, MPEG Files, AVI Files) which you wish to the "Scene_lib"
main folder with the mouse action.
Automatically load these events(swf, MPEG Files, AVI Files) which you wish to he "Scene_lib"
main folder by operating "Event(swf, MPEG Files,AVI Files) Backup/Load" .
(For further information, please see Section_3: "Events Backup/Load" for events loading.
Click the "Setproj" icon (
Overview (menu options)
The illustration below shows the main features and main sub menus options in the menu.
Section_1: Node IP Address Setup
For these connected Nodes controlling the fixtures correctly, all nodes which are used to control the fixtures
MUST be set up individual IP address in this Setup software.
) to open this software in the main folder. A dialog box will bring up as following;
Source Components
-8-
All events(Flash files, Video Files, MPEG Files)
which have been copied to the "Scene_lib" folder
will automatically be listed and display in the
Source Components Presentation List.
Presentation List
To add IP address of nodes which will be used in the
system as needed
To create events as needed.
To copy files as needed.
To create Gvi as needed.
To set DMX control/trigger as needed.
N/C
Exit from the software
Advertisement
Table of Contents
