Dimming Area Operation - Elation E-Node 8 Instruction Manual

Dimming Area Operation

Node is a drop down menu that displays the actual IP
address of each node.
Outport is a drop down menu that displays the
existing outport of the selected Node.
Pixel is a drop down menu that displays the existing
pixel map address of the selected Outport.
Before running X-Software, it is advisable to check how many nodes are used to control the device
and review all the settings in Mapping Operation.
1.1 In the main folder, click the "Runproj"(
the following screen.
1.2 Select an existing node that you use to control the device.
The actual IP address of each node will be listed in the drop down menu.
1.3 Select an existing outport of the selected node to control the device. The outports are set by default.
) icon to enable your X-Software. The X-Software will show you
-23-
Work Grid features to adjust
the brightness