Elation E-Node 8 Instruction Manual page 10

1a. Click the ''Show IP set Form'' icon, a IP setup dialog box will bring up to add IP address of nodes which will
be used as needed.
1b. Enter a valid integer value of node quantity which will be used as needed in the entire system.
1c. Enter an actual IP address of each node in IP Address bar. The actual IP address of each node is provided
by us and labeled on the back of the node.
1d. After clicking the ''Save Set'' icon, all settings will be saved automatically.
Node quantity IP address of each node
172.16.0.1
NOTE:
All nodes IP addresses MUST be kept
consistent with ones, which are set by
using SW1~3 operation. And 172.16.0.0,
172.16.0.3 and 172.16.0.255 are not
available.
-9-