X-Net Configuration Software Operating Instruction; Toolbar Operation; Fileoption Operation - Elation E-Node 8 Instruction Manual

X-Net Configuration Software Operating Instruction

Enter frame value
Enter IP address of
the existing E-NODE 8
Getting started X-Driver Configuration Software (Ver1.00)
In Windows, click the Start button and go to the "Programs" then "X-Net Configuration Software". Move
the pointer to the X-Net Configuration Software icon, the X-Net Configuration Software screen appears
hereinafter:

1.Toolbar Operation:

1.1 Click "OPEN FLASH" icon, a dialogue box will appear on the screen.
Select your desired flash file with extension .swf and click "OPEN" icon to open, click the "Play" icon to play
the flash, "Pause" icon to temporarily terminate and "Stop" icon to end.

2.FileOption Operation:

FileOption is used to control RGB lightings by adjusting contents of presentation bar.
2.1 "Fileconvert" icon used to convert the flash file with extension .swf into the file with extension .scn for
E-NODE 8 playing the one directly.
2.2 "Preview" icon used to temporarily play flash files effect by E-NODE 8 controlling RGB lightings.
NOTE : Before converting flash files, please enter a valid number to set the desired flash frame
in the Convert Set Option.
(Software version:1.00)
-26-