Import Existing Code - Texas Instruments CC3100 SimpleLink User Manual

Getting Started with SimpleLink Studio
11. Press Finish.
12. Select Window>Show View>Project Explorer from the menu.
13. Select the Getting_started project in the Project Explorer, and select File>Properties from the menu.
14. In the Project Explorer window, right click on <Project_Folder_Name>, then select Property.
15. Expand the C/C++ Build menu, and select Tool Chain Editor. Under Current Builder, Select "Gnu
Make Builder", then click Apply.
16. Click the C/C++ Build menu and do the following:
a. Uncheck 'Use the default build command.'
b. Type mingw32-make -f Makefile in the Build command.
c. Uncheck 'Generate Makefiles automatically.'
d. Set the Build Directory as: ${workspace_loc:/Getting_started}
17. Select Environment in the C/C++ Build menu. Ensure the value of MSYS_HOME is empty, then click
Apply.
18. Click the C/C++ General menu, and select Paths and Symbols. Under the Includes tab, in the
10
CC3100 SimpleLink™ Wi-Fi
Figure 6. Import Existing Code
®
and IoT Solution Getting Started Guide
Copyright © 2014–2018, Texas Instruments Incorporated
SWRU375D – June 2014 – Revised May 2018
Submit Documentation Feedback
www.ti.com