Run The Software; Device Manager - Texas Instruments CC3100 SimpleLink User Manual

Getting Started with SimpleLink Studio
4.2

Run the Software

The Getting Started with WLAN Station example uses SimpleLink Studio. This example performs the
following functions:
1. Program restores WLAN configuration to factory default
2. Prompts the user for the SSID of an AP
3. Prompts the user for the security type
4. Prompts the user for the password to the AP
5. Attempts to acquire an IP address through DHCP
6. Attempts to reach the internet
NOTE: For full compatibility ensure Visual Studio 2010 is used. Newer versions of Visual Studio will
not work with the device. Visual Studio 2012 works with the "getting started" example, but
gives the error code -2003 for the weather example, and error code -2005 for the email app.
Option 1. Microsoft Visual Studio:
1. Download and install Microsoft Visual Studio Express 2010 from
us/downloads/download-visual-studio-vs#DownloadFamilies_4.
2. Open Microsoft Visual Studio Express, and select File>Open>Project/Solution.
3. Navigate to C:\TI\CC3100SDK_<x.x.x>\cc3100-
sdk\platform\simplelinkstudio\example_project_vs\getting_started_with_station , and open
getting_started.sln.
4. Select Build>Build Solution from the menu.
5. When building is complete, select Debug>Start Debugging from the menu.
8
CC3100 SimpleLink™ Wi-Fi
Figure 4. Device Manager
®
and IoT Solution Getting Started Guide
Copyright © 2014–2018, Texas Instruments Incorporated
http://www.visualstudio.com/en-
SWRU375D – June 2014 – Revised May 2018
Submit Documentation Feedback
www.ti.com