Cleaning And Maintenance Precautions - LUDLUM MODEL 19 Manual

Model 19 MICRO R METER
Ludlum Measurements, Inc.
Technical Manual
Warning!
The operator is strongly cautioned to take the following
precautions to avoid contact with internal hazardous live
parts that are accessible using a tool:
1. Turn the instrument power
2. Allow the instrument to sit for one minute before accessing
internal components.
The "crossed-out wheelie bin" symbol notifies the consumer that the
product is not to be mixed with unsorted municipal waste when discarding;
each material must be separated. The symbol is placed on the battery
compartment lid. See section 8, "Recycling," for further information.
The "CE" mark is used to identify this instrument as being acceptable
for use within the European Union.

Cleaning and Maintenance Precautions

The Model 19 may be cleaned externally with a damp cloth, using only water
as the wetting agent. Do not immerse the instrument in any liquid. Observe
the following precautions when cleaning or performing maintenance on the
instrument:
1. Turn the instrument
2. Allow the instrument to sit for one minute before cleaning the
exterior or accessing any internal components for maintenance.
Page 5-2
and remove the batteries.
OFF
and remove the batteries.
OFF
Section 5
February 2012