4D.changing The Temperature Scale; Taking A Measurement - ADC Adtemp 429 User Manual

Note: Each press of the Human/Object button is accompanied by a beep
sound to confirm that the setting is activated. (excluding Night modes)

4d.Changing the Temperature Scale

The Adtemp™ 429 Non Contact Thermometer can display readings
in either Fahrenheit (F) or Celsius (C). The default temperature scale
is Fahrenheit. To change the scale to Celsius, power the device on,
then press and hold the Human/Object and Memory buttons
simultaneously for 1 second. Pressing these buttons again will
change the scale back to Fahrenheit. Note: Removing the batteries
will reset the scale to the default setting.

5.Taking a Measurement

1. Press the Measure button to power on the thermometer. The unit will run
a self-test and the LCD will briefly display all of its symbols during this time.
When the device is ready, '00' will appear on the screen, and the thermometer
will beep twice.
2. Select the desired mode by pressing and releasing the Human/Object button.
Note: When taking a patient's temperature, ensure that the thermometer is in
Human mode; the Human symbol will appear on the display. Refer to Section
4c for instructions on selecting a different scan mode.
3. Position the thermometer about 2 inches (5 cm) from the center of the
patient's forehead
with the sensor aimed
between the eyebrows.