Mute Tab; Tx Gate Biasing Tab - Tait TM8100 User Manual

Tm8000 mobiles
Hide thumbs Also See for TM8100:
Table of Contents

Advertisement

Rx Delta Gain
Values
AGC Voltage Cal Pts
AGC Delta Gain
Values

Mute tab

Mute Noise Pt Min
and Max (12.5kHz
BW)
Mute Noise Pt Min
and Max (20kHz
BW)
Mute Noise Pt Min
and Max (25kHz
BW)
Mute Point
Readings

Tx Gate Biasing tab

Final Gate Bias 1
(Very Low to Max
Power)
Final Gate Bias 2
(Very Low to Max
Power)
Driver Gate Bias
Clamp
TM8100 Mobile Radio Calibration Application User's Manual
August 2004 © Tait Electronics Limited
Show the results of calibrating the receiver gain at each frequency specified
in the
Rx FE Tune Cal Freq Pts
gain measured at the first frequency in the grid. Each row is in 0.1 dBm.
Show the results (in mV) of calibrating the automatic gain control voltage
points at various power levels during the
corresponds with the equivalent power level stated in the Signal Input Level
box during the test.
Show the results of calibrating the automatic gain control delta gain (in 0.1
dBm) at various power levels during the
corresponds with the equivalent power level stated in the Signal Input Level
box during the test.
Sets the narrow band minimum and maximum points (in dB SINAD), from
which rows 1 and 2 of the
Sets the medium band minimum and maximum points (in dB SINAD),
from which rows 3 and 4 of the
Sets the wide band minimum and maximum points (in dB SINAD), from
which rows 5 and 6 of the
Displays narrow, medium, and wide-band mute point readings at 8 dB
SINAD and 20 dB SINAD, calculated as a result of the
is the reading taken at the equivalent mute noise point, indicated to the left
of the grid.
Displays the results of the Final Gate Bias 1 test (see
Driver Bias Limit" on page
Displays results of the Final Gate Bias 2 test (see
Driver Bias Limit" on page
Displays results of the Tx Driver Bias Limit test (see
Driver Bias Limit" on page
grid (Test Freqs tab), relative to the receiver
Receiver
Receiver
Mute Point Readings
Mute Point Readings
Mute Point Readings
14).
"Final Gate Bias and Tx
14).
14).
test. Each row
test. Each row
grid are derived.
grid are derived.
grid are derived.
Mute
test. Each row
"Final Gate Bias and Tx
"Final Gate Bias and Tx
Raw data reference
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents