All Cast Surround Kit - Quadra-Fire VOYAGEUR-MBK Installation Manual

VOYAGEUR Insert ACC
H. All Cast Surround Kit
SIZE: 40 IN. W X 30 IN. H
Included in Surround Kit: (2) side pieces, left and right;
(1) l top piece; (1) fastener package.
Tools Needed: Powered 4 to 6 inches long Phillips head
screw driver; pliers
1. Remove contents from box being careful not to scratch
or damage the cast trim pieces.
2. Lay surround pieces face down on a protected surface
to prevent scratching.
3. Align the bosses on the top piece to the holes on the
side pieces. Secure the 3 pieces together.
4. Attach the mounting brackets to the side pieces
included with the kit (Figure 22.1).
5. In order to get a tight seal for the surround, you must
reposition a side shield. There are two holes on the
shield and it will come from the factory secured in the
first (left) hole. Remove the shield and re-install using
the second (right) hole (Figure 22.2).
6. Position the trim on the appliance matching up the
mounting brackets with the slots on the appliance.
7. Attach the surround to the appliance 2 screws.
DO NOT OVER TIGHTEN SCREWS -
THIS MAY DAMAGE PORCELAIN FINISH.
4 Mounting Brackets
Figure 22.1
22
Mounting
Brackets
Attach to Appliance
with Screws
Do not overtighten - may
damage porcelain finish
Figure 22.2
7063-513I
Remove and Reposition
Side Shield using Second
Hole
August 13, 2018