Product Overview And Flow Of Operation - YOKOGAWA PZ4000 User Manual

Product Overview and Flow of Operation

Product Overview
PZ
Retrieves measured data from the PZ to be
displayed on the screen and saved on a storage
medium. Setup parameters, waveform data,
numeric data, and screen image data can be
transferred between the PC and the PZ.
6
The PZ4000 Power Viewer retrieves measured data from the PZ4000 Power Analyzer
(PZ) into your personal computer (PC) via communications (GP-IB or RS-232) or files
and analyzes and displays the data. Data can be retrieved from multiple PZs (up to 4
units) into the PC to be analyzed and edited. By combining the file save functions of the
software (in CSV or BMP format) and software applications on your PC, you can create
reports on the measurement and analysis results.
* Only a single unit if the communication interface is serial (RS-232).
The software can be used in two types of modes: online and offline.
Online mode allows you to change the PZ setup from your PC and retrieve and save
setup parameters and measured data of the PZ into your PC via the communication
interface (GPIB or serial (RS-232)).
Offline mode allows you to work, without connecting the PZ and the PC, with data that
was saved to a floppy disk (FD), hard disk (HD), MO disk, or Zip disk by the PZ or this
software program. The data can be loaded for displaying on the PC screen and storing
on a storage medium on your PC.
Online mode
Measured data,
setup parameters
Screen image
GP-IB/RS-232 cable
Measured data
Setup
parameters
PC
PZ
Loads the data measured on the PZ that has
been saved to a FD to be displayed on the
screen or saved on a storage medium.
Offline mode
Measured data
FD, HD,
Setup parameters
MO, Zip
PC
IM 253734-61E