Specialty Fan Wiring - Timer - QuietCool AFG SMT-3.0 Installation Manual

Hide thumbs Also See for AFG SMT-3.0:
Table of Contents

Advertisement

4. Mount the thermostat in the best location for thermostat readings. Run a 2 wire Romex from the
junction box to the thermostat. Tape the white wire on each side of the 2 wire Romex to indicate that
it is a switch leg.
5. In the junction box, with a wire nut, tie the white common wires together. Using the green ground
screw, ground the green wire from the fan and the 2 wire Romex from the thermostat, to the junction
box. Tie the black wire from the fan to the taped white wire from the thermostat. Tie the black wire
from the power source to the black wire from the thermostat. Replace the cover on the junction box.
Figure 3.2B: Thermostat Wiring in a Remote Location
®
®
ADVANCED ATTIC GABLE FANS
ADVANCED ATTIC GABLE FANS
Specialty Series Fan
Specialty Series Fan
6. In the themostat, tie the black wire to one of the black wires from the thermostat. Tie the taped wire
to the other black wire from the thermostat. Using the ground screw in the thermostat, ground the
ground wire from the 2 wire Romex.

3.3 Specialty Fan Wiring - Timer

For wiring of a Specialty Series Fan with a timer. This wiring method works with all of our Specialty Series fans.
1. For this installation, you will need a 2 & 3 wire Romex, and an 8 Hour Timer.
2. Begin wiring the timer. From your 3 wire Romex, using a wire nut, tie the two red wires together, the
two white wires together, the two black wires together, and the two ground wires together.
3. Open up the junction box that is connected to the fan. Bring your 2 wire and 3 wire into the junction
box.
3. Tie the white common wires from the fan, the power source, and the timer together. Then, using the
green ground screw, ground the green wire from the fan to the handy box.
4. With a wire nut, tie the black wire from the fan to the red wire from the timer.
10
Ground the fan to the junction box
Ground the fan to the junction box
using the green ground screw
using the green ground screw
Junction
Junction
Box
Box
14-2 Wire
14-2 Wire
14-2 Wire
14-2 Wire
Power Source
Power Source
Thermostat
Thermostat
FAN ON
FAN ON
TEMPERATURE
TEMPERATURE
90°
90°
60°
60°
120°
120°
60°
60°
®
®
ADJUSTABLE
ADJUSTABLE
TEMPERATURE THERMOSTAT
TEMPERATURE THERMOSTAT
CAUTION
CAUTION
Automatically started device - to reduce the
Automatically started device - to reduce the
risk of injury disconnect from power supply
risk of injury disconnect from power supply
before servicing. For residential use only. See
before servicing. For residential use only. See
instructions for wiring diagram.
instructions for wiring diagram.
QUIETCOOLSYSTEMS.COM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm es-1100 slpGa es-1500

Table of Contents