Spin Speed); Drying) - Bosch WVH28424GB Instruction Manual And Installation Instructions

starts. Then the programme duration is
displayed, e.g. 2:30h
When the programme has started,
the preselected time can be changed
as follows:
Select Start/Reload A.
1.
Select the 5 (Finish in) button
2.
and change the Finish in time.
Select Start/Reload A.
3.

0 (Spin speed)

8: The spin speed can be changed
before and during the programme (in
rpm, revolutions per minute) depending
on the progress of the programme.
Setting $ (Rinse stop = without final
drain/spin cycle), laundry remains in the
water after the last rinse cycle. The
maximum spin speed depends on the
programme and model.
Overview of programmes~ Page 34

5 (Drying)

@: The drying function can be
activated, deactivated and set with this
button. Washing and drying without
interruption is possible in automatic
mode only. If the programme for
individual drying is selected, automatic
drying or timed drying with a required
drying duration is available.
Changing programme default settings
Notes
Programme selection in Intensive
■
Dry 5 or Gentle Dry ‰ position to
select an individual drying
programme.
Overview of programmes
~ Page 34
The standard drying mode is Aut1.
In this mode the drying time is
automatically set according to the
amount of laundry to be dried. The
result is cupboard-dry laundry.
Drying mode can be set to Aut2 in
order to obtain an extra dry result; or
preselect the drying time which can
be specified by selecting the
5 (Drying) button.
Cupboard dry (Aut1): For single-
layer fabrics. Garments can be
folded or hung up in a cupboard.
Extra dry (Aut2): For fabrics made
of thick, multilayered items of
clothing, which need to be dried
longer. Garments can be folded or
hung up in a cupboard. Laundry
more dry than Cupboard dry.
Programme selection in washing
■
programmes and if washing and
drying is required without
interruption (only for i Cottons,
T + Prewash, f Easy-Care,
o Mixed Load, SuperQuick 15'/ ]
and Allergy+ ;).
Touch button 5 (Drying) and
1.
activate the function Aut1 or Aut2.
Do not exceed the maximum loads
2.
for drying.
Overview of programmes
~ Page 34
Maximum spin speed for the
3.
washing programme will be selected
automatically to obtain a good
drying result.
en
39