Setting The Signal - Bosch WVH28424GB Instruction Manual And Installation Instructions

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to Ú Off.
2.a Set the volume for the button signals (depending on model)
Press the 0 button until the required
volume is reached.
2.b Selecting the volume for the information signals
Turn one position clockwise
Turn one position Press and hold the ° C button +
clockwise. turn one position clockwise.
Go to step 3. or
Press the 0 button until the
required volume is reached.
Setting the signal
Release the button.
Set to Ú Off, which exits setting mode for the
signal volume.
Set to Ú Off, which exits setting
mode for the signal volume.
en
41