Table of Contents

Advertisement

Quick Links

Washer dryer
WVH28471EP WVH2849XEP
en
Instruction Manual and Installation Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WVH28471EP

  • Page 1 Washer dryer WVH28471EP WVH2849XEP Instruction Manual and Installation Instructions...
  • Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4: Intended Use

    Intended use Setting the signal... . 40 Intended use Cleaning and maintenance . . . 41 This appliance is intended for private ■ I n t e n d e d u s e domestic use only.
  • Page 5: Safety Instructions

    Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
  • Page 6: Installation

    Safety instructions The mains plug and the Warning ■ protective contact socket Risk of poisoning! must match and the earthing Detergents and care products system must be correctly may result in poisoning if installed. consumed. The installation must have an If accidentally swallowed, seek ■...
  • Page 7 Safety instructions Warning Warning Risk of fire/material damage/ Risk of injury! damage to the appliance! The appliance is very heavy. ■ The use of extension cords or Lifting it may result in injury. power strips may result in fire Do not lift the appliance on due to overheating or short your own.
  • Page 8: Operation

    Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
  • Page 9 Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
  • Page 10: Cleaning/Maintenance

    Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance.
  • Page 11 Safety instructions Repairs and any other work For safety reasons, use ■ on the appliance must only genuine spare parts and be conducted by our accessories only. customer service or by an Caution! electrician. The same applies Material damage/damage to for replacing the mains cable the appliance (when necessary).
  • Page 12: Protection Of The Environment

    Protection of the environment Protection of the Installation and environment connection P ackaging/old appliance S tandard accessories P r o t e c t i o n o f t h e e n v i r o n m e n t I n s t a l l a t i o n a n d c o n n e c t i o n Check the machine for transport Note:...
  • Page 13: Installation

    Installation and connection @ Water drain hose Caution! H Elbow for securing the water Damage to the appliance drain hose* Frozen hoses may tear or burst. ■ P Water supply hose on standard/ Do not install the washer dryer Aqua-Secure models outdoors and/or in an area where depending on the model there is a risk of frost.
  • Page 14: Installing The Appliance Under/ Between Kitchen Units

    Installation and connection Installing the appliance under/ Removing the transportation between kitchen units protection devices Warning Caution! Risk of electric shock! Damage to the appliance Danger of death if live parts are Before using the washer dryer for the ■ touched.
  • Page 15: Hose And Cable Lengths

    Installation and connection Take the power cord out of the holders. Remove the sleeves. Insert the covers. Lock firmly by pressing on the locking hook. Insert the hose holder. If the supply hose is too short for Note: your connection, you can order an extension from the after-sales service.
  • Page 16: Water Supply

    Installation and connection Water supply Carefully turn on the tap and check that the connection points are not leaking. Notes Do not kink, crush, alter or cut ■ through the water supply hose (otherwise, its strength can no longer be guaranteed). Only tighten the screw connections ■...
  • Page 17: Drainage Into A Wash Basin

    Installation and connection Drainage into a plastic pipe Caution! Damage to the appliance/fabrics with rubber sleeve or into If the end of the outlet hose is immersed a gully in the drained water, water may be sucked back into the appliance and Connecting may damage the appliance/fabrics.
  • Page 18: Electrical Connection

    Installation and connection Electrical connection Before washing/drying for the first time Electrical safety The washer dryer was inspected Warning thoroughly before leaving the factory. To remove any residual test water, run the Risk of electric shock! Fluff Clean l programme the first time Risk of death if live parts are touched.
  • Page 19: Transportation

    Installation and connection Transportation Preparatory work Turn off the tap. Release the water pressure in the supply hose. Filter in the water inlet hose blocked ~ Page 43 Drain any residual washing water. Drain pump blocked ~ Page 42 Disconnect the washer dryer from the power supply.
  • Page 20: The Main Points In Brief

    The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Insert mains plug. Open the washer Select the washing/ Max. load in display Turn the tap on.
  • Page 21: Getting To Know Your Appliance

    Getting to know your appliance Getting to know your appliance W asher dryer G e t t i n g t o k n o w y o u r a p p l i a n c e Hot air outlet Operating/display panel Door with handle Open the door...
  • Page 22: Control Panel

    Getting to know your appliance Control panel Change the default settings for the selected @ Start programme. Select the Start/ programme and select additional functions: Reload button to start, interrupt (e.g. reload the laundry) and cancel the programme.~ Page 29 ( Select buttons °C (Temperature), 5 (Finish in) time, 0 (Spin speed) and Secar (Drying) for default settings.~ Page 37...
  • Page 23: Display Panel

    Getting to know your appliance Display panel Displays for the programme (: Temperature for washing Temperature in °C Ž (cold) – 90°C programme. 0: Programme information. Time: 1:50* Programme duration after programme selec- tion in h:min (hours:minutes) 1 – 24 h Finish in time in h (h=hour) Capacity: 7.0 kg*...
  • Page 24 Getting to know your appliance 8: Spin speed Spin speed in revolutions per minute; $ – 1400* $ (Rinse stop = without final drain/spin cycle, laundry remains in the water after the last rinse cycle) @: Programme progress sym- Washing bols Rinsing Draining/Spinning...
  • Page 25: Laundry

    Laundry Symbols on the care labels ■ Laundry The numbers in the symbols Note: indicate the maximum washing P reparing laundry for washing temperature that may be used. L a u n d r y Sorting laundry according to: Suitable for normal washing process;...
  • Page 26: Preparing Laundry For Drying

    Laundry Empty any pockets. Remove any The following textiles must not be dried: ■ foreign objects. b = care symbol “Do not dry” ■ Wool or textiles containing wool. ■ Delicates (silk, synthetic curtains). ■ Textiles which contain foam rubber ■...
  • Page 27: Operating The Appliance

    Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance Note: P reparing the washer dryer If you have activated the childproof lock, O p e r a t i n g t h e a p p l i a n c e you must deactivate it before you can The washer dryer was tested before set a programme.
  • Page 28: Adjusting The Drying Programme

    Operating the appliance Adjusting the drying Notes Options are retained when the programme ■ appliance is switched off and can be selected, deselected or changed Note: depending on the progress of the If an individual drying programme or programme. washing and drying without interruption The buttons are sensitive, they only is selected, you can change the default ■...
  • Page 29: Loading The Laundry

    Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g.
  • Page 30: Starting The Programme

    Operating the appliance Pour in detergent and/or cleaning Reinsert the drawer. product. Do not use the measuring aid for Note: gel detergents and washing powder, or Dispenser I Detergent for prewash. for programmes with prewash or when Dispenser i Softener, starch. Do not exceed "Finish in"...
  • Page 31: Childproof Lock

    Operating the appliance Childproof lock Notes If there is a high water level, high ■ You can secure the washer dryer to temperature or if the drum is prevent the set functions from being rotating, the door remains locked changed inadvertently. To do this, for safety reasons and reloading is activate the childproof lock when the not possible.
  • Page 32: End Of The Programme

    Operating the appliance For drying programmes: After washing/drying Select Intensive Dry or Gentle Dry. Open the door and remove the Touch button 5 (Drying) and set drying time to 15 minutes. laundry. Turn the programme selector to Select Start/Reload A. Ú...
  • Page 33: Overview Of Programmes

    Overview of programmes Overview of programmes P rogramme on the O v e r v i e w o f p r o g r a m m e s programme selector Programme/Type of washing Options/Information Name of the programme maximum load according to EN50229 Brief explanation of the programme and which textiles it is suitable...
  • Page 34 Overview of programmes Programme/Type of washing Options/Information max. 2 kg Delicate/Silk “ For delicate, washable textiles, e.g.made of silk, satin, synthetic Ž (cold) – 40 °C fibres or blended fabrics. $ – 800 rpm Note: G, O, p Use a detergent suitable for machine washable delicate fabrics or silk.
  • Page 35 Overview of programmes Programme/Type of washing Options/Information Allergy+ ; max. 7(4)* kg/4 kg Hardwearing textiles made of cotton or linen. Ž (cold) – 60 °C Notes $ – 1400 rpm Especially suitable for increased hygienic demands or particu- ■ G, F, O, p larly sensitive skin on account of prolonged washing at a defined temperature, with a higher water level and longer rins- Aut 1, Aut 2...
  • Page 36: Drying Table

    Overview of programmes Drying table Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels) Dry weight in kg 0,5 ~1,0 1,0 ~ 2,0 2,0 ~ 3,0 3,0 ~ 4,0 ~ 0,5 ~ 1,0 ~ 2,0 ~ 2,5 Estimated drying time in min Adjustable drying time in min <60...
  • Page 37: Starching

    Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. Y ou can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
  • Page 38: Spin Speed)

    Changing programme default settings When the programme has started, Notes the preselected time is displayed Programme selection in Intensive ■ e.g.8:00h and counts down until Dry 5 or Gentle Dry ‰ position to the programme starts. Then select an individual drying the programme duration is displayed, programme.
  • Page 39: F (Ecoperfect)

    Selecting additional functions à (Rinse plus) Selecting additional 8:Additional rinse cycle depending functions on the programme; longer programme length for particularly sensitive skin Y ou can select your desired additional and/or for areas with very soft water. S e l e c t i n g a d d i t i o n a l f u n c t i o n s functions by touching the respective buttons.
  • Page 40: Setting The Signal

    Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate setting mode for the signal volume Turn to Ú Stop. Turn one position Press and hold the ° C button + Release the button.
  • Page 41: Cleaning And Maintenance

    Cleaning and maintenance Descaling Cleaning and Not required if detergent dosed maintenance correctly. However, if this does occur, follow the instructions of the descaling Warning agent manufacturer. Suitable descalers C l e a n i n g a n d m a i n t e n a n c e Risk of electric shock! can be purchased on our website or Danger of death if live parts are...
  • Page 42: Drain Pump Blocked

    Cleaning and maintenance Drain pump blocked Close the service flap. If required, engage the disengaged service flap beforehand. Warning Risk of scalding! To prevent unused detergent Note: Washing water is hot when washing at from flowing into the outlet during the high temperatures.
  • Page 43: Filter In The Water Inlet Hose Blocked

    Cleaning and maintenance Filter in the water inlet hose Air filter blocked blocked Turn the programme selector to Ú Stop. Pull out the mains plug. Warning Open and remove the service flap. Danger of death! Take out the air filter. Do not immerse the Aqua-Stop safety device in water (it contains an electric valve).
  • Page 44: Faults And What To Do About

    Faults and what to do about them Caution! Faults and what to do Water damage about them Leaking water may cause damage. Do not open the door if you can still see E mergency release, e.g. if a water through the glass. F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Turn the programme selector to...
  • Page 45: Faults And What To Do About Them

    Faults and what to do about them Display Cause/Remedy The door cannot be opened after the drying programme due to the high tempera- ture. The cooling process continues until the display disappears, after which the door can be opened. Flashes (no water supply): Tap turned on? Water inlet filter blocked? Clean ¹...
  • Page 46 Faults and what to do about them Faults Cause/Remedy Spin result not satisfac- Not a fault – unbalanced load detection system has stopped the spin cycle, ■ tory. washing unevenly distributed. Distribute small and large items of washing in the drum. Laundry wet/too damp.
  • Page 47 Faults and what to do about them Faults Cause/Remedy Drying duration According to the air cooling principle, a higher ambient temperature will ■ extended. result in poor drying performance, so the drying time will be extended. Ensure good ventilation to allow surplus heat to escape. Air filter blocked? Clean the air filter ~ Page 43 ■...
  • Page 48: Customer Service

    Customer service Customer service Technical specifications I f you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do D imensions: about them ~ Page 45 T e c h n i c a l s p e c i f i c a t i o n s 848 x 598 x 590 mm Please contact our customer service.
  • Page 49: Consumption Values

    Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Option Load Energy Water Programme (kg) consumption * Consumption * duration * (kWh) (liter) (hours) i Cottons 20 °C 0,23 2 ¾...
  • Page 52 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

This manual is also suitable for:

Wvh2849xep

Table of Contents