Table of Contents
Advertisement
Installation and connection
en
Drainage into a siphon
The connection point must be secured
with a Ø 24–40 mm hose clip
(specialist store).
Connecting
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connecting
18
Alignment
Loosen the lock nut in a clockwise
1.
direction with a wrench.
Check the alignment of the washer
2.
dryer with a spirit level and, if
required, correct. Adjust the height
by rotating the appliance foot.
All four appliance feet must
Note:
be firmly on the floor.
The washer dryer must not wobble!
Tighten the lock nut against the
3.
housing.
Grip the foot and do not adjust the
height.
Notes
The lock nuts on all four appliance
■
feet must be screwed tightly against
the housing!
Any loud noises, intense vibrations
■
or "wandering" may be due to
incorrect alignment!
Advertisement
Table of Contents
