Accessory Power Port - ASD FieldSpec 3 User Manual

www.asdi.com
2.4

Accessory Power Port

Figure 2-12 Enhanced view of the front panel with the Fiberoptic cable connector, port
WARNING!
Figure 2-13 Cable used from the FieldSpec spectroradiometer accessory power port to
ASD Document 600540 Rev. J
The accessory power port is located on the front of the unit, as shown in
Figure 2-12. This port is where external accessories, such as the Contact
Probe or Source Probe attach to receive power from the spectrometer.
for remote trigger, and accessory power port for probe.
The accessory power port is provided for optional ASD approved accessories.
Attach the large connector end of the cable into the accessory power port of
the front panel. Attach the other end of the power cable into the Contact
Probe, Hi-Brite MugLite, or other ASD approved accessory.
Please contact ASD for information about these accessories.
Never attempt to use unauthorized accessories on the
accessory power port.
the Contact Probe, MugLite, or other authorized ASD accessory.
17
Chapter 2 Setup
FieldSpec® 3 User Manual