Does Not Connect To The Access Point - ASD FieldSpec 3 User Manual

www.asdi.com
A.4

Does Not Connect to the Access Point

ASD Document 600540 Rev. J
Figure A-3 Wireless Network Connection.
• Refer to section A.1,
• Check to make sure the wireless interface on the spectrometer is not set to
ad hoc.
• Check to make sure the SSID of the spectrometer is the same as the
access point.
• If you are using encryption, then make sure you are using the same WEP
key in the spectrometer as the access point.
• Move the access point, spectrometer, and instrument controller
(computer) to the same room to test the connection.
77
Appendix A Troubleshooting
Common Communication
FieldSpec® 3 User Manual
Fixes.