Accessory Power Port - ASD TerraSpec User Manual

www.asdi.com
2.4

Accessory Power Port

ASD Document 600541 Rev. G
Figure 2-7 Shielded cross-over Ethernet cable.
The accessory power port is located on the front of the unit, as is shown in
Figure 2-8. This port is where external accessories, such as the Contact Probe
or Source Probe, attach to receive power from the spectrometer.
Figure 2-8 Enhanced view of the front panel with the fiber optic cable
connector, port for remote trigger, and accessory power port
for probe.
The accessory power port is provided for optional ASD approved accessories.
Attach the large connector end of the cable into the accessory power port of
the front panel. Attach the other end of the power cable into the Contact
Probe, Hi-Brite MugLite, or other ASD approved accessory.
16
Chapter 2 Setup
TerraSpec® User Manual