Table of Contents
Advertisement
Important Safety Instructions
Important safety instructions
Before using your IPD Series, be sure to carefully read the applicable items of this Operation Manual and the Safety
Instructions.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire of electric shock, do not
expose this apparatus to rain or moisture.
16. Do not expose this equipment to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
17. Do not connect the unit's output to any other voltage
source, such as battery, mains source, or power supply,
regardless of whether the unit is turned on or off.
18. Do not remove the top (or bottom) cover. Removal of the
cover will expose hazardous voltages. There are no user
serviceable parts inside and removal may void the warranty.
19. An experienced user shall always supervise this professional
audio equipment, especially if inexperienced adults or
minors are using the equipment.
2
IPD SERIES Operation Manual rev 2.0.0
Standards
This equipment conforms to the requirements
of the EMC Directive 2004/108/EC and the
requirements of the Low Voltage Directive
2006/95/EC.
Standards applied: EMC Emission EN55103-
1, E3
EMC Immunity EN55103-2, E3, with S/N below
1% at normal operation level.
Electrical Safety EN60065, Class I
This equipment is tested and listed according to the
U.S. safety standard ANSI/ UL 60065 and Ca-
nadian safety standard CSA C22.2 NO. 60065.
UL made the tests and they are a Nationally
Recognized Testing Laboratory (NRTL).
Warnings
Explanation of warning symbols
The lightning bolt triangle is used to
alert the user to the presence of
un-insulated "dangerous voltages"
within the unit's chassis that may be
of sufficient magnitude to constitute a
risk of electric shock to humans.
The exclamation point triangle is used to
alert the user to presence of important
operating and service instructions in the
literature accompanying the product.
Hide quick links:
Advertisement
Table of Contents
