Lab.gruppen IPD 1200 Operation Manual page 17

The following features and functions are accessible in the Global View:
1. Global Control Panel
a. Global INFO - Shows the total number of amplifiers connected on the network, current number muted
and current number off.
b. Power ON/OFF - Control and status indication for all connected IPD units.
c. MUTE - Mutes both channels of all amplifiers in the group.
d. Expand/collapse group button - Toggles between expanded view (display all amplifier panels) and
collapsed view (group panel only).
2. Global View Menus. (See Section 9.3 following)
3. Group Control Panels - The Group Control Panel provides the following information and functions:
a. DELETE GROUP - Deletes the group. Pop-up window requires confirmation.
b. GROUP NAME - Name entered by user when new Group set up. Name can be changed in
SET UP mode. (See Section 10.1.)
c. GROUP INFO - Shows the total number of amplifiers in the group, current number muted and current
number off.
d. MUTE - Mutes both channels of all amplifiers in the group.
e. SET UP - Brings up the Configure Group window. (See Section 10.1)
f. Expand/collapse group button - Toggles between expanded view (display all amplifier panels) and
collapsed view (Group panel only).
4. Amplifier Control Panels - The Amplifier Control Panel provides the following information and functions:
a. MUTE - Mutes both channels of the amplifier.
b. Amplifier Name - Default name is the model of the amplifier. Custom names may be set in the Amplifier
Header window. The units in Global View are positioned based in alpha-numeric order. The unit named
with the lowest first number or letter will be placed at the top left, the second lowest number at top right,
continuing downward.
c. Network Status - ONLNE or OFFLINE. Amplifiers will show as online when AC power and network are
connected, even if the amplifier is in standby mode.
d. Amplifier IP address - This is for identification and is not user configurable in this view.
e. Amplifier Mode - Displays current mode, either Stereo or 2-Way.
f. Output Meters - Displays amplifier output level.
g. MIXER Button - Selects amplifier and opens Amplifier Header and Input Mixer Views. If the mixer button
displays "No Sync", the amplifier is online but has not synchronized with the controller.
h. Amplifier "PING" - Clicking anywhere on the Amplifier Control Panel will blink all LEDs (green) and the
display on the associated amplifier for ten seconds.
9. IntelliDrive controller overview
IPD SERIES Operation Manual rev 2.0.0
17