Mac Software Installation; Ipad App Download And Installation - Lab.gruppen IPD 1200 Operation Manual

4. Locate and open the PDF file "Installation Instructions and Release Notes". This document will contain any
important updated information regarding the latest version of IntelliDrive Controller and basic information on
software installation.
5. Double click/tap on the Windows Installer file appropriate for your operating system type (32-bit or 64-bit).
If you are not sure which operating system type you have, you will find it listed on the System Properties page
(Control Panel > System and Security > System).
6. Follow the prompts given by the Installation Wizard.
Important Note: In order for IntelliDrive Controller to function, it must be given permission to pass through the
Windows Firewall (or third-party firewall if Windows Firewall is replaced). During installation, you will be prompted to
allow access. Be certain that access is allowed to any networks to which amplifiers may be connected. By default,
access may be allowed only to private networks; click the "Public Networks" if amplifiers may be connected to this
network.
7. Following installation of IntelliDrive Controller, you will be prompted to also install Microsoft C++ Redistributable
Setup. This program is necessary for operation of IntelliDrive Controller. Follow the on-screen prompts to
install. This only has to be installed on the computer one time; this can be disregarded on any subsequent
installations or updates of IntelliDrive Controller.

7.3. Mac software installation

To install IntelliDrive Controller:
1. Locate the compressed (zipped) downloaded folder
2. Click/tap on "Extract all files"
3. Open the uncompressed folder
4. Locate and open the PDF file "Installation Instructions and Release Notes." This document will contain any
important updated information regarding the latest version of IntelliDrive Controller and basic information on
software installation.
5. Double click/tap on the "IntelliDrive Controller MAC" Zip folder.
6. Follow the prompts given by the Installation Wizard.

7.4. iPad App download and installation

Download the IntelliDrive Controller iPad App from the App Store. Search for "Lab.gruppen" or "IntelliDrive".
The app is free. The user interface layout is the same as on the Windows version, and most key operator functions
are available. Operation parallels that of the Windows interface, except with variations and enhancements available
through iPad touchscreen conventions. For example, EQ bandwidth may be adjusted using two-finger spread and
pinch operations.
Note: Use of the IntelliDrive Controller iPad App requires connection of a WiFi-enabled router in the network.
(See Section 6.4)
7. IPD Controller software installation and network configuration
IPD SERIES Operation Manual rev 2.0.0
15