Edimax ES-5804PH Datasheet

The ES‐5804PH is a 5‐port Fast Ethernet PoE switch with 4 PSE/P
small network environments. It is also specially designed for PoE
trains, subway cars, and emergency vehicles. This PoE switch is v
environments with limited space.
Complies with the IEEE 802.3at Power over Ethernet (PoE+) Sta
The ES‐5804PH features 4 IEEE 802.3at Power over Ethernet (Po
It can convert standard 12‐24V DC and 48V DC electricity into lo It can convert standard 12 24V DC and 48V DC electricity into lo
network accessories via existing LAN cables. With PoE detection
connected device is IEEE 802.3at compliant. In the event that a
transmitted through the LAN cable. With the ES‐5804PH, netwo
easily set up and managed.
Compliant with Cat 5 Ethernet Cables for Higher Cost Efficiency
The ES‐5804PH can transmit both power and network data via C
networking cables or power adapters are necessary for PoE app t ki bl
of establishing a sturdy network environment.
Auto‐MDI/MDI‐X
Every port on the ES‐5804PH can automatically detect the conn
whether it is bridging two switches or connecting the ES‐5804PH
Auto‐Negotiation
Whether it is 10Mbps, 100Mbps, half‐duplex mode, or full‐duple
detect the speed at which the connected network device is runn
Non‐Blocking
This switch can receive and forward network traffic seamlessly w
can simultaneously support bandwidth speeds of up to 200Mbp
all connected devices and ensures a smooth‐running network en
Store and Forward
With this function, the ES‐5804PH can maximize network perfor
packets.
Fast Ethernet
d t f P E
t 5‐Port Switch with 4 PoE+ Ports
PoE ports. It is designed for sturdy network connections in
E video surveillance applications in such environments as buses,
very compact in size, making it ideal for applications in
andard
oE+) ports, which supplies up to 30 watts of electricity per port.
ow‐voltage DC electricity to power IEEE 802.3at compliant ow voltage DC electricity to power IEEE 802 3at compliant
n capability, the ES‐5804PH is able to verify whether the
PoE device is not detected, only network data will be
ork products such as access points and network cameras can be
y
Cat 5 Ethernet cables. With the ES‐5804PH, no special
plications. The ES‐5804PH reduces the difficulty, time, and cost li ti Th ES 5804PH
ected cable type. There is no need for crossover cables
H to a computer.
ex mode, every port on the ES‐5804PH can automatically
ning and adjust accordingly.
with its non‐blocking wire speed. All ports on the ES‐5804PH
ps in full‐duplex mode. This feature allows for full wire speed for
nvironment.
rmance while minimizing the propagation of bad network
ES-5804PH
d th diffi lt ti d t