Rs-232 Interface - Russound CAV6.6 Instruction Manual

Six-zone, six-source audio-video controller amplifier
Hide thumbs Also See for CAV6.6:
Table of Contents

Advertisement

The CAV6.6 supports RS-232 communication
with various third-party automation systems
through the RS-232 ports. These ports are also
used for firmware updates, and for controller
programming through the PC Power Tool soft-
ware program.
The two RS-232 com ports are located on the
front and the back of the CAV6.6 and use a
DB-9 cable connection. Before performing
MAKING CONNECTIONS
updates or programming, select a front or rear
RS-232 port and set the Front/Rear RS-232
switch on the front of the controller as well. The
switch is located next to the DB-9 port.
For RS-232 protocol, available firmware updates
and the RNET Backup Utility, see the Document
Center at www.russound.com. Look for the
Technical Documents under RNET Systems.
INSTALLER

RS-232 Interface

41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents