Uno-S1 Keypad Button Functions - Russound CAV6.6 Instruction Manual

USER
OPERATION

UNO-S1 Keypad Button Functions

The UNO-S1 keypad operates in a similar
manner as the UNO-S2 keypad.
Room On/Off
Press and release
System Keypad. This also turns on the corre-
sponding CAV6.6's room, and any presets previ-
ously assigned will be activated, including set-
tings for bass, volume, last source selected,
etc. Press and release
System Keypad. This will also put the corresponding
CAV6.6's room into a standby state.
System All On/Off
An "All On" command is issued by pressing
and holding for 3 seconds, after an initial room
has been turned on. An "All Off" command can
be issued to all rooms by pressing and holding
after the room has been turned off.
System On Indicator
When the room is off, but the system is on in
another room, is illuminated by a green
backlight and the "SYS ON" icon remains visible.
Source Select Button
scrolls through the six audio source inputs.
To change sources, press and release
the sources are sequentially selected, each
source's name appears on the keypad LCD
14
to turn on the UNO
to turn off the UNO
. As
panel. When a source is selected in more than
one room, the "SHARED" icon will appear on all
UNO Keypads using that source.
used to enter the User Menu with a press and
hold action. (See next page for User Menu)
Volume Up/Down Buttons
The room's audio output is adjusted using
Command Keys
The command keys
selected source at the UNO Keypad. The command
keys are activated with a press and release, or
press and hold to access secondary functions.
is also
.
allow control of the