Advanced Bionics AURIA Product Manual page 2

Processor Module
T-Mic® Microphone
Earhook
PowerCel™
Rechargeable Battery
Quick-Start Guide and System Checks:
Step 1: slide the fully charged
turn on the Auria sound Processor. check to ensure that the Powercel is in a fully
aligned position with the Processor Module.
Step 2: Position the
Accent color cover
Step 3: Make sure that the
that the cable is not twisted or frayed.
Step 4: Align and gently snap into place the selected Earhook. check to verify that the
Earhook is properly positioned. To remove the Earhook, simply apply slight pres-
sure and turn to the right or left until the Earhook releases from the post. If the
Firefly Earhook is in place, check to ensure that the Powercel is fully charged by
verifying that the lEd sequence displays four (4) quick blinks as the Powercel is
slid into place.
Step 5: Verify that the
Program selector
Step 6: Ensure that the Processor
Step 7: Ensure that the headpiece
magnetic attraction).
Step 8: Perform a behavioral listening check, using the ling six sounds or another
listening activity.
Tools for schools by Advanced Bionics
Built-in
Microphone
Accent
Color Cover
Powercel into position on the
over the Auria Processor and snap into place.
headpiece cable is plugged into the Processor Module. check
and Volume control are in the desired position.
is in a comfortable position behind the ear.
is positioned over the internal implant (you will feel the
2
AURIA® soUnd PRocEssoR Product Guide
Volume Control
Program Switch
Headpiece Cable
Connector
Headpiece and Cable
with Color Cover
Processor Module. This will