Power Options - Advanced Bionics AURIA Product Manual

Power Options

The Powercel Battery is used to power the Auria Processor. There are two types of
Powercel Batteries that can be used with the Auria sound Processor: the Powercel™
slim or Powercel™ Plus. The Powercel Plus is larger than the Powercel slim and
provides increased operating time before a battery change is needed. Powercels
can be fully recharged in 4–5 hours and do not need to be fully depleted before
recharging.
The Auria PowerPak can be used instead of a Powercel. It utilizes one AA battery
(alkaline or rechargeable) and easily screws open or closed to replace the battery.
A latch securely attaches the PowerPak to the Auria Processor, and the PowerPak
can be clipped to clothing or worn in a pocket or pouch. The cable is available in the
following lengths: 11, 22, and 32 inches. The PowerPak provides operating times
averaging 25 hours, with alkaline batteries.
How to Replace the PowerCel or PowerPak
1. locate the tracks on the underside of the Processor and the top of the
Powercel/PowerPak.
2. Position the Powercel/PowerPak so that the contact is toward the back of the
Processor.
3. Guide the Powercel/PowerPak onto the tracks on the Processor.
4. slide the Powercel/PowerPak onto the Processor until it stops and is aligned
with the Processor. do not force the Powercel/PowerPak onto the Processor.
Replace the Accent color cap, if necessary. lift the latch to secure the
PowerPak to Auria.
connecting the Powercel
Tools for schools by Advanced Bionics
4
AURIA® soUnd PRocEssoR Product Guide
Powercel slim and Powercel Plus
Auria with PowerPak
NOTE: The Auria Sound Processor
is turned on and off by connecting
or removing the PowerCel or
PowerPak. When not in use, the
parent or child should remove the
PowerCel/PowerPak, otherwise the
Auria Sound Processor remains on,
and the PowerCel/PowerPak and
continues to drain.