Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SCA User Manual

X11SCA/-W/-F User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)

Tools Needed

AUDIO_FP
JTBT1
USB0/1 (2.0)
JWD1
LED_PWR_SB
JF1
SP1
JBT1
CMOS CLEAR
PCI-E_M.2-M1
I-SATA4 I-SATA2 I-SATA0
I-SATA5 I-SATA3 I-SATA1
JSD1
I-SATA6
I-SATA7
JL1

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (9)
JPL2
PCI-E_M.2-M2
B3
U.2-1
USB4/5 (3.0)
SYS_FAN2
26
Standoffs (9)
Only if Needed
DVI
AUDIO
LAN2 USB6/7(3.1)
LAN1
USB2/3(3.0)
JPL1
CPU
USB8 (3.1,TypeC)
JPW1
USB9 (3.1,TypeA)
DP
HDMI
SYS_FAN3
JPW2
JVR1
DIMMA1
DIMMA2
DIMMB1
DIMMB2
JPI2C1