MODE
Setup
Sys Info
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The Intimidator Spot 260 uses up to 14 DMX channels, which defines the highest configurable address to
499.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Address.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select the starting address, from 001–512.
5.
Press <ENTER>.
DMX Personalities
The Intimidator Spot 260 has two DMX personalities, a 14-channel personality, and a 8-channel
personality.
To choose which DMX personality to use, follow the steps below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Run Mode.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select DMX.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select the DMX personality, from 14CH or 08CH.
7.
Press <ENTER>.
Gobos
Page 8 of 20
PROGRAMMING LEVELS
Indicator
Flash if DMX
Reset
Factory Set
Ver:
Running Mode
DMX Address
Temperature
DESCRIPTION
OFF
Enables/Disables LED Indicator
ON
OFF
LED Indicator flashes when DMX is
turned ON or OFF
ON
Resets the product
Loads factory defaults
V_
Displays the software version
_ _ _ _ _ _
Displays the current running mode
_
_ _ _
Displays the current DMX address
_ _ _
Displays the current product temperature
Intimidator Spot 260 User Manual Rev. 1
O
PERATION