Pip Function; Turning Off The Power - Runco Reflection CL-500 Owner's Operating Manual

PIP function

Press the PIP button to enable the PIP function
For PIP purposes, there are two groups of inputs
separated by their display modes:
Video Group: Video, S-Video and Component Y/
C /C inputs
B R
Graphic Group: HDTV input and Computer input.
The PIP can show one input from the Graphic
Group within one input from the Video Group, or
show one input from Video Group within one
input from the Graphic Group.
Press the PIP button to switch to the main
window or turn off PIP function.
Select the input source of main window by
pressing the INPUT button.
Press the ACTIVE button to switch to the active
window. You can change the the input signal
setting in active window.
Press PIP+ or PIP- to adjust the size of PIP
window.
Adjust the position of the PIP window with the
ARROW keys ( / / / ).

Turning off the Power

Press the OFF key on the remote control to turn
off the unit
After turning off the unit, the POWER LED will
blink green and the fans will operate for 1 minute
to cool down the lamp. The projector will not
respond to any command until cooling down
process is completed. The POWER LED will light
solid orange once the cooling down cycle has
completed.
ACTIVE PIP+
PIP
ON
VIDEO S-VIDEO COMPONENT
COMPONENT HD RGB HD
User's Manual
PIP-
LIGHT
OFF
PC
17
4. Basic Operation