Auxiliary Screen; Machine Info; Alarms; Information Screens / Message Screens - Advanced Poly-Packaging T-1000-S14 Advanced Poly-Bagger Operation Manual

Auxiliary Settings, See Figure 3-82.
Options Settings, See Figures 3-83 thru 3-87

3.54 Auxiliary Screen

The T-1000 Touch Screen Program is preprogrammed to accept most infeed equipment signals so that the
two or more pieces of equipment "talk" to each. Occasionally, reprogramming will be necessary to
interface auxiliary (infeed) equipment that is not manufacturer by APPI. Additional cabling may be
required which will transfer the signals between the T-1000 and your existing equipment. See Figure 3-57.
Once connected and with both systems running independently, turn the Auxiliary Signal ON by pressing
the ON/OFF toggle button from the Auxiliary Screen. An output time delay is provided which delays the
bagger from sealing after the auxiliary infeed signal has cycled and signaled the bagger to seal. To adjust
the delay timer, press the <Output Delay> button and enter the value, in seconds, on the number keypad.
Help screens are available
See Figures 3-58 thru 3-60.

3.55 Machine Info

See section 3.52

3.56 Alarms

The first screen is the Operation Mode and displays the time and frequency of a particular operation. The
Alarm Status window will give the status of a particular warning signal. The "Alarm Data" screens keep
track of how long and how often a particular warning message has been signaled
See Figures 3-94 thru 3-99.

3.57 Information Screens / Message Screens

The T-1000 touch screen program provides for many informational screens that provides descriptions of
functions or screens. See Figures 3-100 through 3-115 for examples of messages that indicate the status of
the bagger. Some messages provide functional messages that describe errors or the status of equipment
and some provide instructions for operators to follow to bring the bagger back online.
To reset a message screen, clear the condition first (if required) and then touch the screen.
60 60