Uf-5000 Operation Screen - Advanced Poly-Packaging T-1000-S14 Advanced Poly-Bagger Operation Manual

Index Count value is the number of compartments that will be indexed before providing an output signal to
the bagger.
The UF-5000 is equipped with an emergency stop (ESTOP) switch, either a push button or pull cord.
When the button is pressed, a screen will appear indicating this condition.
3.41 UF-5000 Infeed Conveyor Settings Screen
The UF-5000 settings screen provides all the settings to control production speeds and timing of the
integration components of a system. See Figure 3-58.
Fill Time is the amount of time from the time the conveyor cycles to the point that the bagger cycles.
Flight Delay is the delay time that the flight sensor is active when the flight (cleat) passes through the
optical eye (normally set a .2 sec.). Light/Dark setting is determined by the type of sensor used to detect
the cleats (typically set at Light).
Input Delay is the amount of time from the point the conveyor receives a signal to index before the
conveyor indexes.
Output Delay is the amount of time after the conveyor indexes before the conveyor signals the bagger that
it has cycled.
Sensor Delay is the amount of time after the conveyor indexes that the photo eyes (CE-10 option) "looks"
for a parts before indexing another compartment of the conveyor.
Funnel Delay is the amount of time after the conveyor indexes to the point that an accumulating funnel
(AF-10 option) cycles (if equipped).
Adjust each timer by pressing the associated timer and entering the value on the number keypad. After
each value, test the settings by cycling the conveyor. Press the UF-5000 Mode button to return to the UF-
5000 Operation Screen.
3.42 US-5000 Semiautomatic Net Weigh Scale Operation Screen
The US-5000 "Kit" Net Weigh system is a versatile semiautomatic bagging system which provides
For fast bagging of kits or one type of part per bag, in counts up to 10,000 pieces. See Figures 3-59
and 3-60.
If your company bags a wide variety of parts with multiple parts of various counts in bags, the US-5000
Kit Packaging system is an excellent solution.
This option is accessed through the Options screen. A separate manual is provided if this option
is purchased or is available upon request
3.43 Counters Screen
The T-1000 is equipped with three internal counters as a standard feature. To access the counter screen
press the <Counter> button from the Main Menu. See Figure 3-61
Continuous Strip Counter: This option allows you to seal bags in a strip, without separating them at the
perforation. If you set this counter value to 10, for instance, you will have a strip of 10 bags connected.
The bagger will then reverse to separate the 11th bag.
49 49