Icom IC-F2610 Service Manual page 7

Hide thumbs Also See for IC-F2610:

Table of Contents

• RMK-1 connection

¡ Remove 3 allen-socket bolts from the front plate using

an allen-wrench (1/32 in).

™ Separate the front unit from the transceiver main unit.

£ Attach the 'RMK-1 rear unit attachment' to the trans-

ceiver main unit using the supplied screws.

¢ Remove 4 screws from the attachment to open the

front plate.

∞ Connect an optional separation cable OPC-609 (1.9 m)

to the inside of the front plate and tighten the cable lug

using the screw.

§ Re-attach the front plate.

¶ Remove 4 screws from the 'RMK-1 front unit attach-

ment' to open the rear plate.

• Connect the other end of the optional separation cable

to the atachement and tighten the cable lug using the

screw.

ª Re-attach the rear plate.

º Attach the front unit and attachment with the 3

removed allen-socket bolts.

Downloaded from

www.Manualslib.com

manuals search engine

Separation

Front plate

Separation

cable

3 - 2

RMK-1 rear unit

attachment

Supplied screws

with the RMK-1

Rear plate

RMK-1 front unit attachment

Table of Contents