Measurement; Performing A Measurement - Seca 525 Instructions For Use Manual

5.3 Measurement

Performing a measurement

34 •
➔
Performing a measurement
➔
Performing offline measurement (WiFi not available)
➔
Connecting the measuring mat
➔
Canceling a measurement
1. Switch on the system ➔
2. Ensure that the measuring mat is correctly suspended in the storage
compartment of the monitor ➔
compartment.
The symbol is displayed on the monitor.
3. Prepare the seca patient file ➔
4. Press the bia tab.
The seca patient file is transmitted to the measuring mat.
5. Enter the patient position using the
The patient position entered is displayed on the monitor.
The button switches to
The patient position entered has been transmitted to the measuring mat.
NOTE
The patient position entered is saved as long as the measuring mat is
switched on. This enables you to measure several patients without
having to re-enter the patient position.
6. Take the measuring mat out of the storage compartment.
Switching system on/off.
Suspending measuring mat in storage
Preparing seca patient
button of the monitor.
.
file.