Mitsubishi Electric Melsec iQ-R60AD8-G User Manual page 20

Item
Weight
*1 For details on the I/O conversion characteristics, refer to the following.
Page 39 I/O Conversion Characteristics
*2 Except for the conditions under noise influence.
*3 The accuracy at an ambient temperature when the offset/gain setting is configured.
*4 The accuracy based on a temperature change of 1.
*5 The period at which the digital output value is updated.
*6 The time taken for an analog input signal to arrive at the A/D converter inside the module.
*7 These voltage and current values are instantaneous values at which no breakdown occurs in the internal resistance of the module.
*8 A count more than 50000 times causes Number of writes to offset/gain settings reach limit error (error code: 1080H).
*9 Maximum resolution in the user range setting.
*10 The range of data that is stored in Digital output value (32 bits).
Immediately after power-off of the power supply module, if the input power source is applied to the power
supply module again, the A/D converter module may not start up. When applying the input power source to
the power supply module again, do so five seconds or more after the shut-off of the power.
Restrictions
The module R60AD16-G takes up two slots and so there are restrictions on the available firmware version of the RCPU
module. For details, refer to the following.
•  MELSEC iQ-R CPU Module User's Manual (Application)
2 SPECIFICATIONS
18
2.1 Performance Specifications
Specifications
• R60AD8-G: 0.19kg
• R60AD16-G: 0.26kg