Table of Contents
Advertisement
54
Parameter
Remote Access
Configuration
SuperIO Configuration
Advanced
Configure Nat414 Serial Port(s) and Parallel Port
___________________________________________________
Serial Port1 (Address/IRQ)
Parallel Port Address
Parallel Port IRQ
Parallel Port Mode
ECP Mode DMA Channel
•
Onboard Serial Port 1
Use these items to disable the serial ports or to assign a port
address and IRQ to the ports.
•
Onboard Parallel Port
Use this item to disable the parallel port or assign a port address to
the parallel port.
•
Parallel Port IRQ
Use this item to determine the IRQ of the parallel port.
•
Parallel Port Mode Select
Use this item to determine the mode of the parallel port. You can
select Normal, Bi-directional, EPP (Enhanced Parallel Port) or ECP
(Extended Capabilities Port).
•
Parallel Port DMA Channel
These items are not available in most circumstances. If they are
available, use them to allocate DMA (Direct Memory Access)
channel for the parallel port.
Description
Configure Remote Access.
SuperIO Chipset Nat414
[3F8/IRQ4]
[378]
[7]
[ECP]
[3]
V02.03 ©Copyright 1985-2000, American Megatrends Inc.
4 Setup utility
Select Screen
Select Item
+ -
Change Option
F1
General Help
F10 Save and Exit
ESC
Exit
Advertisement
Table of Contents
