Table of Contents
Advertisement
90
Checkpoint Code
97h
98h
99h
9Ah
9Bh
9Ch
9Dh
9Eh
A2h
A3h
A4h
A5h
A7h
Appendix A: AMIBIOS POST Checkpoint Codes
Description
Initialization before the C800 adaptor ROM gains
control has completed. The adaptor ROM check is
next.
The adaptor ROM had control and has now
returned control to BIOS POST. Performing any
required processing after the option ROM returned
control.
Any initialization required after the option ROM
test has completed. Configuring the timer data
area and printer base address next.
Set the timer and printer base addresses. Setting
the RS-232 base address next.
Returned after setting the RS-232 base address.
Performing any required initialization before the
Coprocessor test next.
Required initialization before the Coprocessor test
is over. Initializing the Coprocessor next.
Coprocessor initialized. Performing any required
initialization after the Coprocessor test next.
Initialization after the Coprocessor test is complete.
Checking the extended keyboard, keyboard ID, and
Num Lock key next. Issuing the keyboard ID
command next.
Displaying any soft errors next.
The soft error display has completed. Setting the
keyboard typematic rate next.
The keyboard typematic rate is set. Programming
the memory wait states next.
Memory wait state programming is over. Clearing
the screen and enabling parity and the NMI next.
NMI and parity enabled. Performing any
initialization required before passing control to the
adaptor ROM at E000 next.
Advertisement
Table of Contents
