Table of Contents
Advertisement
Checkpoint Code
85h
86h
87h
88h
89h
8Bh
8Ch
8Dh
8Fh
91h
95h
96h
Description
The memory size check is done. Displaying a soft
error and checking for a password or bypassing
WINBIOS Setup next.
The password was checked. Performing any
required programming before WINBIOS Setup
next.
The programming before WINBIOS Setup has
completed. Uncompressing the WINBIOS Setup
code and executing the AMIBIOS Setup or WINBIOS
Setup utility next.
Returned from WINBIOS Setup and cleared the
screen. Performing any necessary programming
after WINBIOS Setup next.
The programming after WINBIOS Setup has
completed. Displaying the power on screen
message next.
The first screen message has been displayed. The
<WAIT...> message is displayed. Performing the PS/
2 mouse check and extended BIOS data area
allocation check next.
Programming the WINBIOS Setup options next.
The WINBIOS Setup options are programmed.
Resetting the hard disk controller next.
The hard disk controller has been reset.
Configuring the floppy drive controller next.
The floppy drive controller has been configured.
Configuring the hard disk drive controller next.
Initializing the bus option ROMs from C800 next.
See page 91 for additional information.
Initializing before passing control to the adaptor
ROM at C800.
89
Advertisement
Table of Contents
