Connecting - Scansonic R110 Owner's Manual

Connecting the R110
First switch off all equipment when connecting your R110.
Set the On/off switch (4) to Off.
Connect the power cable to the connector on the back(10)
and then to the mains voltage.
Connecting the loudspeakers
Always switch the power off when connecting loudspeakers.
Connect the loudspeaker cables to the binding pots on
the output terminals (9), accepts wire up to Ø 4mm.
Make sure that positive terminal binding posts
(marked + and coloured red) are connected to the positive
output terminal binding posts on the loudspeaker and
that the negative terminals (marked – and coloured black)
are connected to the negative output terminal on the loudspeakers.
Mount the Wi-Fi antenna (short) onto the Wi-Fi terminal (6).
Mount the FM/DAB antenna (long) onto the antenna terminal (7).
R110
6
4
On
Off
Right Speakers Left
9 10
Coaxial optical SubOut
Ethernet Wi-Fi Antenna
6 7