Network - Scansonic R110 Owner's Manual

R110

Network

Network wizard
Select Region
Use Up / Down or navigation buttons on the remote control
to highlight desired wireless network from the list or wired,
if you want to use wired ethernet (RJ45 cable),
press Select to enter selection.
Enter the network key (password).
Use Up / Down or navigation buttons on the remote control
to to select the characters.
Press Select to enter the highlighted character.
Highlight OK and press Select to save password.
The unit will not try to connect to the network
If connecting fails, it will return to the previous screen.
The network is now connected.
Press Select to exit wizard.
The unit remembers the last four networks i has connected to, and automatically
tries to connect to whichever one of the i can find.
For users experienced with networks settings, there are also other options for viewing and
manually altering network settings from Menu > System > Settings > Network.
8