External Source - Scansonic R110 Owner's Manual

External source

The R110 can playback signal from different external sources,
such as MP3 player, DVD, TV etc.
Alway turn the volume down and switch off all devices,
before connecting external sources.
Coaxial (digital)
Conect the coaxial cable from the external source to the
coaxial connector (1) on the back.
Press Mode several times until the display shows Coax in,
or press COAX on the remote control.
Optical (digital)
Conect the optical cable from the external source to the
optical connector (2) on the back.
Press Mode several times until the display shows Opt in,
or press OPT on the remote control.
AUX (analouge)
Conect the RCAl cable (red and white) from the external source
to the line in connectors (L and R) (8) on the back.
Press Mode several times until the display shows AUX in,
or press AUX on the remote control.
Sub out
The R110 can provide signal to an active subwoofer.
Alway turn the volume down and switch off all devices,
before connecting a subwoofer.
Sub out
Conect the RCA mono cable from the subwoofer to the
SubOut connector (3) on the back.
R110
12
1 2
Coaxial optical SubOut
Ethernet Wi-Fi Antenna
3
Coaxial optical SubOut
Ethernet Wi-Fi Antenna Line in
Line in
8