Dvi extender over fiber with emi shielding (8 pages)
Summary of Contents for Avenview FO-HDMI-SET
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. www.avenview.com...
Introduction Avenview FO-HDMI-SET consists of a Transmitter and Receiver that lets you extend HDMI signal from DVD Player, Blu-ray Player Set-top box, console systems or other video equipments over fiber optical signal without any signal degradation. High Speed and long distance transmission by Optical fiber (LC type Multi-Mode 4-ch fiber.
2. Connect the enclosed copper HDMI cable into each display source and display 3. Connect copper HDMI cable which is attached to display source into FO-HDMI-SET Transmitter 4. Connect Transmitter to the HDMI cable (course) and Receiver to HDMVI Cable (display) 5.
UXGA 1600 x 1200 @ 60Hz 100 meters (330 feet) 850nm VCSEL PIN Photo Diode Multi-Mode Fiber 0˚ to 50˚C Degree Reserved (N.C. on device) www.avenview.com Signal TMDS Data2 Shield TMDS Data 1+ TMDS Data 1- TMDS Data0 Shield TMDS Clock+...
Page 7
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the FO-HDMI-SET and is the answer not in the manual?
Questions and answers