Care And Cleaning; Cleaning The Stand Mixer - KitchenAid 5KSM3311 Manual

USING THE STAND MIXER
Insert attachment into attachment
hub, making certain that attachment
power shaft fits into the square
attachment hub socket. It may be
3
necessary to rotate the attachment
back and forth. When it is in the
proper position, the pin on the
attachment will fit into the notch
on the hub rim.

CARE AND CLEANING

CLEANING THE STAND MIXER

IMPORTANT: Do not wash the wire whip in the dishwasher. Do not immerse the Stand
Mixer body in water or other liquids. These parts should be hand washed.
Turn Stand Mixer off and unplug
before cleaning. Wipe the Stand
Mixer body with a soft, damp cloth.
Do not use household/commercial
1
cleaners. Wipe off the beater
shaft frequently to remove any
accumulation of residue. Do not
immerse in water.
*Accessory sold separately
Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
4
to the Stand Mixer. See the
Instructions manual that came
with your attachment for detailed
directions on using the attachment.
The bowl, flat beater, dough hook,
flex-edge beater, and pouring shield*
(top shelf only) may be washed in a
2
dishwasher; or, clean them thoroughly
in hot, sudsy water and rinse
completely before drying. Do not
store beaters on the shaft.
CARE AND CLEANING | 17