Drill Master 500X User Manual page 10

5. Service
a) Have your tool serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
For Service in the USA, Contact:
Darex, LLC
PO Box 730
210 E Hersey St
Ashland OR 97520
b) Do not dispose of electrical products with
household waste. Waste electrical products
should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your local authority or retailer for
recycling advice.
Specific Safety Rules
⚠
WARNING! ALWAYS use proper safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or dust mask if
operation is dusty. ALWAYS wear certified safety equipment:
• ANSI Z87.1 eye protections (CAN/CSA Z94.3)
• ANSI 512.6 (53.19) hearing protection
• NIO5H/OSHA respiratory protection
⚠
WARNING! Use of this tool can generate and/or disperse
dust, which may cause serious permanent respiratory or
other injury. Always use NIOSH/OSHA approved respiratory
protection appropriate for the dust exposure. Direct particles
away from face and body.
10
Phone: (800) 418-1439
Fax: (541) 552-1377
Email: info@darex.com
www.drilldoctor.com