Carrier 3V VVT 33ZCVVTZC-01 Installation And Start-Up Instructions Manual page 42

Table 16- Linkage Maintenance Table
DESCRIPTION VALUE UNITS STATUS FORCE NAME
Zone Linkage
Air Source Bus # 0 ASBUSNUM
Air Source Element # 8 ASDEVADR
Master Zone Element # 118 MZDEVADR
Operating Mode COOLING ASOPMODE
Air Source Supply Temp 55.0 dF ASTEMP
Start Bias Time 0 min STRTBIAS
Occ Heat Setpt 68.0 dF OHS
Occ Cool Setpt 74.0 dF OCS
Unoc Heat Setpt 64.0 dF UHS
Unoc Cool Setpt 78.0 dF UCS
Ref Zone Temp 7! .0 dF ZT
Occ Ref Zone Temp 7! .0 dF OZT
Composite CCN Value 0.0 CCCNVAL
Occupancy Status (1 = occ) 0 OCCSTAT
Next Occupied Day Fri NXTOCCD
Next Occupied Time 10:15 NXTOCCT
Next Unoccupied Day NXTUNOD
Next Unoccupied Time 00:00 NXTUNOT
Prey Unoccupied Day Fri PRVUNOD
Prev Unoccupied Time 04:01 PRVUNOT
REF ZONE TEMPERATURE-- This variable displays the
weighted average of the space temperatures, collected by the
linkage coordinator, from polling its associated zones. The
temperatures are weighted by the maximum airflow capacities
of the zone controllers scanned by file linkage coordinatol:
Ref Zone
Temperature: Display Units F ((2_)
Display Range -40.0 to 245.0
Network Access Read Only
OCCUPIED REF ZONE TEMPERATURE -- This vmiable
displays the weighted average of the space temperatures of
occupied zones, collected by the linkage coordinatok fiom
polling its associated zones. Tile temperatures m'e weighted by
the maximum airflow capacities of the zone controllers
scanned by the linkage coordinatol:
Occupied Ref
Zone Temperature:Display Units F (C)
Display Range -40.0 to 245.0
Network Access Read Only
COMPOSITE CCN VALUE -- This wuiable displays the
high, low or average of the CCN variable collected from each
zone as configured in the Linkage Master (Coordinator) Con-
figuration Screen. Tile value is sent to the network address and
vmiable specified within that configuration table.
Composite
CCN Value: Display Range 0 to 65535
Network Access Read Only
OCCUPANCY STATUS--This variable displays a "1"
when at least one of the associated zone controllel.s (that me
being scanned) is in the occupied mode.
Occupancy Status:Display Range 0 or I (1 = occupied)
Network Access Read only
NEXT OCCUPIED DAY- This variable displays the day
when the next associated zone is scheduled to change fi_m
unoccupied to occupied mode. Tiffs point is read in conjunction
with the next occupied time to allow the user to know the next
time and day when a zone will become occupied.
Next Occupied
Day: Display Range MON, TUE, WED,
THU, FRI, SAT. SUN
Network Access None
NEXT OCCUPIED TIME -- This variable displays the time
of day when the next associated zone is scheduled to change
from unoccupied to occupied mode. Tiffs point is read in con-
junction with the next occupied day to allow the user to know
the next time and &ty when a zone will become occupied.
Next Occupied
Time: Display Range 00:00 to 24:00
Network Access None
NEXT UNOCCUPIED DAY-- This variable displays the
day when the next associated zone is scheduled to change from
occupied to unoccupied mode. Tiffs point is read in conjunction
wifll the next unoccupied time to allow the user to know the
next time and day when a zone will become unoccupied.
Next Unoccupied
Day: Display Range MON, TUE, WED,
THU, FRI, SAT. SUN
Network Access None
NEXT UNOCCUPIED TIME -- This v_uiable displays the
time of&ty when the next associated zone is scheduled to change
fi_m occupied to unoccupied mode. Tiffs point is read in con-
junction with the next unoccupied day to allow the user to know
the next time and day when a zone will become unoccupied.
Next Unoccupied
Time: Display Range 00:00 to 24:00
Network Access None
PREVIOUS UNOCCUPIED DAY -- This vmiable displays
the &ty when the last associated zone changed from occupied
to unoccupied mode. This point is read in conjunction with the
previous unoccupied time to allow the user to know the last
time and day when a zone became unoccupied.
Previous Unoccupied
Day: Display Range MON, TUE, WED,
THU, FRI, SAT. SUN
Network Access None
PREVIOUS UNOCCUPIED TIME -- Tiffs variable displays
the time of day when the last associated zone changed from
occupied to unoccupied mode. Tiffs point is read in conjunction
with the previous unoccupied day to allow the user to know the
last time and &ty when a zone became unoccupied.
Previous Unoccupied
Time: Display Range 00:00 to 24:00
Network Access None
42