3.8
BUBBLE WITH DMX
1. Set the first three operational addresses (bubble setting, smoke setting, fan speed) to define
the desired output, see Section 1.6.
2. Make sure that each prescribed safety zone is free from persons.
3. Activate the safety address. The FX LED indicator on each machine lights up and the bubble
fluid starts circulating.
4. When it's time to bubble, activate the fourth operational address (Go trigger).
5. Enjoy the view!
6. Deactivate the fourth operational address (Go trigger) to stop blasting bubbles.
MAGICFX® SMOKEBUBBLE BLASTER — User and Installation Manual
27