Digital Equipment VAXstation 2000 Owner's Manual page 92

Figure 3-1: The LN03
33 CM
(13 IN)
40.6 CM
(16 IN)
53.3 CM
(21 IN)
The LN03S bitmap option module consists of a printed circuit board that
is inserted into the available option slot of the LN03 printer. This option
module's key feature is an on-board memory capacity of one Mbyte of dynamic
RAM used for bitmap storage. The LN03S option module also contains up
to 128 Kbytes of ROM for program and font storage.
The printer and host system communicate through the standard RS232-C
serial interface.
All setup features in the LN03 PLUS are the same as in the base LN03 and
are controlled through the default setting of configuration switches or under
program control.
To order an LN03 PLUS printer or an LN03S option module for installation
into an existing LN03 printer, contact your sales representative. You can
install the LN03 PLUS printer yourself. After assembling the printer, see the
VAXstation 2000 Hardware Installation Guide.
Options for the VAXstaiicn 2000 3-3