Digital Equipment VAXstation 2000 Owner's Manual page 38

9. Type 1 and press Return. Any other number causes the following text to
be displayed:
VSfmt_RES_Err #6
84 FAIL
» >
This message is also displayed if you have mistakenly inserted an RX50K
diskette, which is preformatted and should not be formatted in the
VAXstation 2000. The message also indicates that no diskette was inserted
in the drive, or that the drive lever was not moved to the vertical position.
Start over with the TEST 70 command at the console prompt after this
error.
The following text appears next if no errors exist:
VSfmt.QUE.RUsure (DUA2 1/0) ?
10. Type the number 1 and press Return to continue. The following message
appears slowly:
VSfmt.STS.Fmting OK
VSfmt_STS_CkRxfmt OK
VSfmt_RES_Succ
» >
The diskette has been successfully formatted and can now be used to
store data.
If for any reason you do not want to continue, type the number 0. If you
see any device number other than DUA2 in the text, type the number 0.
When you do this, you see the following message:
VSfmt_RES_Abtd
84 FAIL
» >
The formatter has now stopped. You must start at the beginning of the
procedure when you are again ready to format a diskette.
If an error occurred during formatting, one of the following messages
appears:
1 -26 VAXstation 2000 Owner's Manual