Advertisement
STEP 5
First, remove the preassembled 6 Hex
Pan Head Screws (No. 14) and 6
Washers (No. 15)
from the Slide Rail
(No. 4)
with Allen Wrench (No. 84).
Then attach the Slide Rail (No. 4) to
the Main Frame (No. 1) with 6 Hex
Pan Head Screws (No. 14) and 6
Washers (No. 15) tightly using Allen
Wrench (No. 84).
STEP 6
1. First, remove the preassembled 2
Hex Socket Cap Screws (No. 22) from
the Axle (No. 19). Then attach the
Adjustment Handle (No. 8) to the
Axle (No. 19), and secure tightly with
the 2 Hex Socket Cap Screws (No. 22)
using Allen Wrench (No. 83). Make
sure the Adjustment Handle (No. 8) is
pointing up.
2. Set the Handlebar (No. 3) onto the
Seat Tube (No. 2), and secure tightly
with the 2 Square Neck Bolts (No. 10),
2 Washers (No. 15) and 2 Ball Cap
Nuts (No. 11) using Spanner (No. 82).
Connect the 2 Pulse Wires (No. 41)
with the 2 Pulse Sensor Wires 1 (No.
42).
7
Advertisement
