Advertisement
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the Front Stabilizer (No. 6) and
the Rear Stabilizer (No. 7) to the Main
Frame (No. 1) with the 4 Square Neck
Bolts (No. 9), 4 Arc Washers (No. 12)
and 4 Ball Cap Nuts (No. 11) using
Spanner (No. 82).
STEP 2
Attach the Pedal (No. 27L/R) to the
Crank (No. 40L/R) with the Spanner (No.
82).
NOTE: Make sure to attach Right Pedal
(No. 27R), marked (R), to the Right
Crank (No. 40R) and should be tightened
clockwise. Attach the Left Pedal (No.
27L), marked (L), to the Left Crank
(No.40L).
It
should
be
tightened
counter-clockwise. Attaching the Pedal
(No. 27L/R) to the wrong Crank (No.
40L/R) or turning it the wrong direction
can damage the Crank.
5
Advertisement
